Mode d'emploi

Installez votre étagère de douche sans perçage.

En suivant ces étapes, vous pouvez prolonger la durée de vie et la fixation de votre étagère de salle de bain.

  • 1 | Nettoyer la surface à l'aide d'alcool ménager (ou lingette fournis) pour éliminer les éventuels résidus (calcaire ou poussière).

  • 2 | Rincer puis sécher la surface et patienter quelques minutes. Assurez-vous que l'environnement soit parfaitement sec.

  • 3 | Fixer les deux bandes en position horizontale sur l'étagère et une bande verticale pour le support, en appuyant fermement sur chacune d'elles.

  • 4 | Poser l'étagère sur le mur en exerçant une pression constante pendant au moins 60 secondes. Évitez les zones présentant des reliefs de plus de 1 mm ainsi que les joints afin d'assurer une adhésion optimale.

  • 5 | Attendre 24 heures avant toute utilisation.

FAQ

What surfaces can I stick my shelf or bracket to?

The included 3M adhesive strips provide a strong and durable attachment to smooth, non-porous, clean surfaces.

Here are the recommended surfaces:
- Smooth and glazed tiles
- Glass
- Metal
- Rigid plastic
- Polished marble

Avoid sticking on:
- Porous surfaces (raw concrete, plaster, untreated wood)
- Painted surfaces (paint may peel off when the adhesive is removed)
- Textured or relief walls
- Wet or dusty surfaces

For porous, painted, or textured surfaces, it is recommended to use screw fixing, using the holes provided for this purpose. This guarantees a secure and durable installation.

How to peel off and re-stick the product?

To remove the product :

  • Gently peel off the product by pulling it slowly from one edge or by
  • If adhesive residue remains on the surface, use a cloth dampened with household alcohol.

To reattach the product :

  • Reproduce the steps in the instructions

By following these steps, you can extend the life and fixation of your product.

How to clean shelves and supports?

To clean shower shelves and supports:

  1. Use a soft cloth or non-abrasive sponge with warm water and white household vinegar.
  2. Avoid cleaning products containing acids, strong alkalis or abrasive agents that could damage the surface.
  3. Rinse thoroughly with clean water to remove any soap or cleaner residue.
  4. Dry with a clean cloth to prevent water or limescale marks from appearing.

For optimal maintenance, it is recommended to replace the 3M adhesive every year. You can order replacement adhesives directly from our website. This ensures a strong and long-lasting bond.

What are the dimensions of my product?

- Shelf dimensions: 21 x 9 x 6 cm

- Support dimensions: 28mm neck, 64mm length, 74mm depth.

Can I put any bottle on the shower holders?

Shower holders are designed to accommodate most standard refillable bottles. However, we recommend using bottles up to 500ml.

Do you have any other questions? Contact us!